 |
|
 |
Why choose B-Air Blowers?
B-Air Blowers are the only blowers available on the market with outstanding quality and performance backed by an award for "Best Customer Service". |
|
|
Why are low amps so important?
If you rent out or use your inflatables, you know how frustrating it is when a "breaker trips", and you must either explain to client on phone what to do or make another trip back to the client to reset the breaker.
A low amp blower will drastically minimize or eliminate this scenario, without compromising performance.
Also, in the case of operating a generator to power the blowers, the lower the amp draw the more units you are able to hook up to a generator, or use a less powerful generator for one or two units. |
|
|
Why are louvers needed?
Our louvers are designed and patented to insure safety by prolonging the deflation process by automatically shutting the louvers when there is reverse air as a result of power failure. |
|
|
Is it a good idea to have reserve blowers?
Absolutely yes! It's like driving a car without a spare tire.
Even though our products are of high quality and built to last, it is always a good idea to have a back-up blower just incase something goes wrong, and your booked event is at stake. |
|
|
What do I do in case of a Warranty Claim?
Just call into our toll free number at 1-877-800-2247 to obtain a RMA# (Return Merchandise Authorization Number) and send it in and we will do the rest to get you up and running as soon as possible. |
|
|
Do I need maintenance on my blowers?
No. Just keep them clean and free from water or heavy moisture. |
|
|
Can I use an extension cord?
Yes. Make sure it's a 12G thickness and you do not exceed 50'. |
|
|
|
| MODEL |
APPLICATION |
#BP-1 H.O (Bear)
#KP-1 (Kodiak) |
Ideal for 13 x 13's or 15 x 15 commercial bounce houses and slides. The most versatile used blower for inflatable bounce houses/slides. |
#BP-2
SuperBear |
Very powerful blower available for the Largest Inflatable games/slides up to 24'+ that require High Static Pressure & CFM's. Helps firm up older worn-out units. |
| #PP-1.5 (Panda) |
Used in larger structures up to 22 ft. Also used to create firmness on older units. |
| #KP-280 (Koala) |
To inflate small advertising structures for display. |
| #KP-680 (Koala) |
To inflate back yard / household bounce houses and 13 x 13's |
| #KP-1200 (Koala) |
Inflates typical backyard/commercial bounce house up to 15 x 15. |
| #GP-1 (Grizzly) |
Used for many applications, including Advertising Roof Top Inflatables, cash cubes and various crawl-through inflatables. |
| #POP-2 (Polar) |
Used primarily for larger structures requiring High Static Pressure to insure firmness. These are also very popular for indoors due to the low noise level. |
| #CUB-1 (Cub) |
Ideal versatile positioned blower to inflate all sorts of ornamental inflatable structures for display purposes. |
#BB-1 (Big Bear)
#BB-2 (Big Bear 2) |
Ideal Vortex Fan for Advertising Sky Dancing tubes for up to 60 feet tall. |
|
|
What kind of a generator should I use?
We recommend using a minimum of 2500W for 1 (BP-1-H.O) blower.
For example: A BP-1-H.O uses 6.9 running amps.
Therefore 6.9 x 115V (volts) = 793 watts to run continuously.
But on start-up, it will use up to 17 amps (17 x 115V = 1955 watts) to get it started, which is just under a 2000 watts generator.
Remember that the start up is high because it needs back pressure from the inflatable to insure continuous low amp draw. |
|
|
Can I use these blowers for anything else other than inflatables?
No, (except the grizzlies #GP-1), you can only use these blowers as long as you have back pressure to drop the amp draw. We highly recommend using them on inflatables, which insure adequate back pressure to keep the blower running. The only exception to this is the grizzly blower that requires no back pressure at all. |
|
|
Can I use these blowers in the rain?
Absolutely not. It is not recommended to use in any environment where there is water present. |
|
